So, this project was sidelined until I had to make another BatchPCB purchase. Thankfully it wasn’t too long until I had the opportunity to work on it again! The current setup is basically 4 of the original 4 RGB LED Controller boards and 12 of the updated DR1r3 boards. All 16 are wired in parallel and being controlled by my desktop machine. You can see an extended version of this RGB test sequence after the break and I’m also including the (uncommented, sorry!) Processing 1.1 code that I used to control the boards.
Tag: Controller
4 RGB LED Controller Update
I recently began working on a consulting project that required the creation of some PCBs. Since I have had such great success with BatchPCB.com in the past, I decided to use them again to fab the custom PCBs. The BatchPCB purchasing system adds a few static fees (set-up, handling, and shipping), so I felt that this was as good a time as any to make some additional of my PIC16F628 4 RGB LED PWM Controller boards with a couple of modifications.
